- This tutorial assumes that the reader is familiar with some standard procedures in OpenShift (creating secrets, creating config-maps.) If you are not familiar with these processes, please refer to the OpenShift documentation.
- The memory settings configured for each container are to be intended as the minimum for a production environment. Wherever applicable, this document will provide settings for a minimum for a test drive environment and optimal for a larger scale production environment
- If your cluster is not allowed to communicate with a server on the internet, the "Create ImageStream" process will need to be performed by manually pulling (from DockerHub) and pushing (to your image streams) images.
- This guide, and the provided starter configuration files will assume the deployment will occur in the apifortress project/namespace. If this is not the case for your setup, please update all current host name references to apifortress, as in postgres.apifortress.svc or tools.apifortress.svc
- Create a secret in OpenShift that contains the DockerHub user credentials for the account shared with API Fortress. As the repositories on the APIF-side are private, you must submit the same account that was submitted with the configuration survey.
- Create the API Fortress OpenShift image streams with the provided apifortress-imagestream.yml with:oc create -f apifortress-imagestream.yml
core-server.ymlto point at the established image stream. Changing the bracketed value in the below example would change the selected imagestream.spec:containers:- name: apifortressimage: '**\[imagestream-changeit\]**/apifortress/apifortress:16.5.3'resources:limits:memory: 8Gi
Ensure that the cluster is capable of supporting the default image memory limits. The apifortress container is set for 8GB of memory. The optimal memory setting is 16GB, the minimum memory setting is 4GB;
memorySettings(optional parameter) describe the minimum and maxium heap memory the process can use. Xmx should be set to 1/2 of the available memory of the process. You don't need to tweak these values if you don't change the overall available memory. This is an example of the setting to be placed among the environment variables:- name: memorySettingsvalue: '-Xms1024m -Xmx4098m'
Ensure that any critical key/value pairs have been defined. The configuration files should be populated with the values submitted with the pre-configuration survey, but for safeties sake a user should ensure that grailsServerUrl has been passed the URL that the instance will be reached through, that license has been passed a license key and that adminEmail, adminFullName and companyName have been defined. These values are all found in the env section of the apifortress.yml file. While it is not critical to deployment, it is strongly recommended that the user configures the mailer service as well. This section in env:env:- name: apifortressMailEnabledvalue: "true"- name: apifortressMailFromvalue: email@example.com- name: apifortressMailSmtpHostvalue: ""- name: apifortressMailSmtpPasswordvalue: ""- name: apifortressMailSmtpPortvalue: "25"- name: apifortressMailStartTLSvalue: "true"- name: apifortressMailSmtpUsernamevalue: firstname.lastname@example.org- name: apifortressMailUseSESvalue: "false"
as well as the settings in the AFMAILER Microservice should be completed to allow the platform to generate emails.
NodePortis the mechanism for communicating with the platform. This can be replaced with a
LoadBalancerif required. When creating an OpenShift Route, this is where the Route should point.# >>> API Fortress NodePort >>>apiVersion: v1kind: Servicemetadata:name: apifortresslabels:app: apifortressspec:type: NodePortselector:app: apifortressports:- port: 8080name: httploadBalancerIP:sessionAffinity: ClientIP---
Each of the database services in dependencies.yml has a preconfigured definition for the amount of disk space allocated to the service. These values can be edited to match the available disk space that you wish to provide for said services.
For MongoDB the proposed memory setting is 8Gi. The minimum is 1Gi, the optimal is 16Gi. However, for the inner workings of MongoDB, any increase in memory will result in better performance.
MongoDB will store most of the data produced by the platform, so make sure the disk size is reasonable for your use case
For PostgreSQL the proposed memory setting is 1Gi which is considered also an optimal setting. The minimum is 512Mi.
Start the dependency services by typing:
Once these services have spun up, you can start the main API Fortress platform with:
Access the platform with theURL provided in the
apifortress.xml file. Login using the default admin username and the default password (
"foobar" - change it ASAP). You should now be able to access the API Fortress Dashboard.
The API Fortress downloader is the agent that retrieves the resources to be tested. Downloaders can be installed in various locations, so factors such as latency and download time can be measured by remote consumers. Click here to learn more about the Downloaders.
Login to API Fortress with the admin user, access the API Fortress admin panel by clicking the “user” icon in the top right, then click Admin Panel.
Choose “Downloaders” from the list of actions and click on the “Add Downloader” button.
Fill in the following fields:
- Name: Write a recognizable name.
- Location: A representation of where the downloader is. ie. Chicago
- Latitude / Longitude: The geographical position of the downloader.
- Last Resort: Check this to make it the default downloader used.
- URL: The address of the downloader, followed by port (default 8819) and path /api. In our OpenShift deployment, our downloader address would be https://downloader.apifortress.svc:8819/api
- API Key, API Secret: Write these two values down for use later.
Step 3 - Move the Key and Secret Values to
downloader.yml file and enter the API Key and API Secret provided by the platform in the previous step.
Start the downloader with:
Open the HTTP client from the tools drop-down menu in API Fortress. Attempt to contact a site that is accessible from this server environment. API Fortress should now be able to successfully communicate with other websites.
Users per agent are the maximum number of virtual users that each Load Agent can provide.
Large numbers of simulated users will require large amounts of hardware resources. Contact your DevOps team to develop a strategy for resource allocation.
- Locate and open the file named application.conf. It is located in the core-server-etc directory.
- Line 14 of this file (fixed-pool-size) should have its value adjusted to match the desired number of maximum users per agent.
- Line 48 of this file (nr-of-instances) should have its value adjusted to match the desired number of maximum users per agent. These two values should match.
Step 2 – Configure
Locate and open config.yml. It is located in core-server-etc.
First, we have to configure the baseURL
- baseURL is located on line 3.
- If the Load Agent and the API Fortress Dashboard are located on the same cluster, then you can replace the baseURL with the internal address and port of the Dashboard on the server.
- If the Load Agent and the API Fortress Dashboard are located on different clusters, you can replace the baseURL with the actual URL of the Dashboard. That is to say, the URL you would use to access it via web browser.
Next, we need to provide the API Key and Secret.
- Open the main API Fortress dashboard and click the gear icon in the upper right corner to access the settings menu
- Click the “API Keys” option in the left sidebar.
- Click “+API Key”
Copy the API Key to line 5 of config.yml.
Copy the Secret to line 6 of config.yml.
- The next step is to add the new Engine to API Fortress itself.
- Log into API Fortress as an administrator.
- Click the user icon in the upper right corner, and then click “Admin Panel”
- Click “Engines” on the left side of the screen.
- Click “+Engine”
- Enter the name and location of the Engine.
- The CRN value defaults to a random string. It is very recommended that you change it to something human-readable, but unique in the list. This is the internal name of the engine.
- After modifying the CRN, copy the value to line 11 of config.yml
- Copy the secret to line 12 of config.yml
- Select the Owning Company of the Engine. An Engine must be owned by a single company. The default value (Public Engine) should not be chosen.
- Select “Yes” for “Dedicated to Load Testing“
- Click the green check to save the Engine settings.
Create a config-map called 'core-0' from the core-server-etc directory.
The memory settings may vary a lot based on the number of virtual users the load agent is meant to support. The default 2Gi is generally OK for up to 50 virtual users. It is to be noted that as the process is memory, CPU and network intensive, better results are achieved by introducing more load agents versus increasing the size of each one. For the very same reason, it's generally pointless to run multiple load agents in the server.
Start the load agent service with:
Access the Load Testing tool by clicking on the Tools dropdown at the top of the view in API Fortress. The Load Agent that you just deployed should be visible on the right side of the screen.
If you're having the dashboard go through a gateway, it is likely that you will want to run the container in HTTP and the gateway in HTTPS. Therefore the grailsURL in the configuration will need to be in HTTPS. At this point the API Fortress dashboard will perform a hard check on the protocol at each request which will always appear as in HTTP, causing an illegal redirect. This is done for security reasons.
To overcome this issue you will need to override one configuration file in the Tomcat configuration via a configMap. This is not the default in the API Fortress Dashboard image on purpose, again, for security reasons.
We will assume that the gateway will forward the x-forwarded-proto header.
The file to be added is located in the deployment files you have been provided: (works for both OpenShift and Kubernetes): /tomcat_conf/context.xml
Tweak the file according to your needs
Create a config map for the single file named tomcat-context
Change the apifortress service in the apifortress.xml file as follows: Add this fragment within the containers element:volumeMounts:- name: tomcat-contextmountPath: /usr/local/tomcat/conf/context.xmlsubPath: context.xml
Add this fragment in the spec element:volumes:- name: tomcat-contextconfigMap:- name: tomcat-context
By doing so, we will have API Fortress to accept the original protocol as the actual protocol being used.